Handicap Stainless Steel Grab Bars Product Specificaions All grab bars are fabricated of heavy duty 18 gauge type 304 satin finish stainless steel tubing. Bars are heliarc welded to stainless steel flanges. Bars will withstand a force of 900 lbs. Flanges and cover plates are type 304 stainless steel with a satin finish. All bars have a 1-1/2" wall clearance. Construction Concealed with snap-on flange: 14 gauge mounting flange 3" in diameter with 3 mounting holes. 20 gauge type 304 stainless steel cover. Concealed with set screws: 10 gauge 4" deep 3" diameter flange with a minimum of 3 set screws. 13 gauge concealed mounting plate with 3 slotted mounting holes. Exposed screw mounting: 10 gauge mounting flange 3" in diameter with 3 mounting holes. Optional Finishes Peened gripping surface: add suffix 'P' Knurled gripping surface: add suffix 'K' Bright polished finish: add suffix 'B' Brass with polished finish: add suffix 'BB' Brass with satin finish: add suffix 'SB' Specifying Instructions When specifying grab bars insert the model numbers (shapes) into the double zeros at the end of the grab bar series number. Example: an exposed fastened 1-1/2" grab bar 24" long is part number: 8414H. Click picture for close up view   Handicap Stainless Steel Grab Bars Snap-On Concealed Mounting Image Left - Top 5100H Series 1" Diameter 5200H Series 1-1/4" Diameter 6200H Series 1-1/2" Diameter Concealed with Set Screw Image Left - Center 5800H Series 1" Diameter 5400H Series 1-1/4" Diameter 6400H Series 1-1/2" Diameter Optional Peened Finish Exposed Screw Mounting Image Left - Bottom 5600H Series 1" Diameter 5000H Series 1-1/4" Diameter 8400H Series 1-1/2" Diameter Optional Knurled Finish Straight Bars Grab Bar Configurations